Show Component

                                <gmi:MI_Instrument xmlns:gmi="http://www.isotc211.org/2005/gmi" uuid="8293FAD4B8EF75F2E040AC8C5AB4576F"><gmi:identifier><gmd:MD_Identifier xmlns:gmd="http://www.isotc211.org/2005/gmd"><gmd:code><gco:CharacterString xmlns:gco="http://www.isotc211.org/2005/gco">OMPS &gt; Ozone Mapping and Profiler Suite</gco:CharacterString></gmd:code></gmd:MD_Identifier></gmi:identifier><gmi:type><gco:CharacterString xmlns:gco="http://www.isotc211.org/2005/gco">imager</gco:CharacterString></gmi:type><gmi:description><gco:CharacterString xmlns:gco="http://www.isotc211.org/2005/gco">Instrument Type: imager, Operational Mode: crosstrack, Collection
              Type: pushbroom, Other Information: The OMPS consists of two sensors, a nadir sensor
              and a limb sensor. The nadir sensor uses a wide field-of-view pushbroom telescope to
              feed two separate spectrometers. The nadir total column spectrometer (mapper) measures
              the scene radiance between 300 to 380 nanometer (nm) with a resolution of 1 nm sampled
              at 0.42 nm and a 24-hour ground revisit time. Measurements from this spectrometer are
              used to generate total column ozone data with better than 50 x 50 kilometer (km)
              resolution at nadir. The nadir profile spectrometer measures between 250 and 310 nm
              with the same spectral sampling, in a single ground pixel of 250 x 250 km. The limb
              sensor measures the along-track limb scattered solar radiance with 1 km vertical
              sampling in the spectral range of 290 to 1000 nm. Three vertical slits sample the limb
              at 250 km cross-track intervals to provide for better than 7-day ground revisit times.
              The three slits are imaged onto a single charge-coupled device (CCD) (identical to
              both nadir CCDs).</gco:CharacterString></gmi:description><gmi:mountedOn/></gmi:MI_Instrument>