1. Home
  2. Organizations
  3. National Oceanic and ...
  4. 2012 NOAA Office for Coastal ...

2012 NOAA Office for Coastal Management Coastal Inundation Digital Elevation Model: Mobile/Tallahassee (AL/FL) WFO - Wakulla (portion), Franklin (portion), Jefferson, Taylor, Dixie, and Levy Counties

This digital elevation model (DEM) is a part of a series of DEMs produced for the National Oceanic and Atmospheric Administration Office for Coastal Management's Sea Level Rise and Coastal Flooding Impacts Viewer (www.coast.noaa.gov/slr/viewer). The DEMs created for this project were developed using the NOAA National Weather Service's Weather Forecast Office (WFO) boundaries. Because the WFO boundaries can cover large areas, the WFO DEM was divided into smaller DEMs to ensure more manageable file sizes. The Mobile/Tallahassee (AL/FL) WFO DEM was split into three smaller DEMS. They are divided as follows: 1. Mobile/Tallahassee (AL/FL) WFO - Mobile County in Alabama and Escambia, Santa Rosa, and Okaloosa (portion) Counties in Florida 2. Mobile/Tallahassee (AL/FL) WFO - Okaloosa (portion), Walton, Bay, Gulf, Franklin (portion), and Wakulla (portion) Counties 3. Mobile/Tallahassee (AL/FL) WFO - Wakulla (portion), Franklin (portion), Jefferson, Taylor, Dixie, and Levy Counties. This metadata record describes the DEM for the Mobile/Tallahassee (AL/FL) WFO - Wakulla (portion), Franklin (portion), Jefferson, Taylor, Dixie, and Levy Counties. The DEM includes the best available lidar data known to exist at the time of DEM creation for the coastal areas of Wakulla (portion), Franklin (portion), Jefferson, Taylor, Dixie, and Levy counties, that met project specification. This DEM is derived from LiDAR collected for the Florida Department of Emergency Management (FDEM). Hydrographic breaklines used in the creation of the DEM were obtained from FDEM and Southwest Florida Water Management District (SWFWMD). This DEM is hydro flattened such that water elevations are less than or equal to 0 meters. This DEM is referenced vertically to the North American Vertical Datum of 1988 (NAVD88) with vertical units of meters and horizontally to the North American Datum of 1983 (NAD83). The resolution of the DEM is approximately 5 meters.

Data and Resources

Additional Info

Field Value
Last Updated May 10, 2020, 03:09
Created January 3, 2020, 02:18
access_constraints ["Access Constraints: None | Use Constraints: The data set is provided \"as is,\" without warranty to its performance, merchantable state, or fitness for any particular purpose. The entire risk associated with the results and performance of this dataset is assumed by the user. This data set should be used strictly as a planning reference and not for navigation, permitting, or other legal purposes. | Distribution Liability: Any conclusions drawn from the analysis of this information are not the responsibility of the Office for Coastal Management or its partners."]
bbox-east-long -82.402132
bbox-north-lat 30.672998
bbox-south-lat 28.913633
bbox-west-long -85.247077
contact-email coastal.info@noaa.gov
coupled-resource []
dataset-reference-date [{"type": "publication", "value": "2012"}]
frequency-of-update notPlanned
guid gov.noaa.nmfs.inport:48058
licence ["NOAA provides no warranty, nor accepts any liability occurring from any incomplete, incorrect, or misleading data, or from any incorrect, incomplete, or misleading use of the data. It is the responsibility of the user to determine whether or not the data is suitable for the intended purpose."]
metadata-date 2020-02-04T00:00:00
metadata-language eng
progress completed
resource-type dataset
responsible-party [{"name": "NOAA Office for Coastal Management", "roles": ["pointOfContact", "custodian"]}]
spatial {"type": "Polygon", "coordinates": [[[-85.247077, 28.913633], [-82.402132, 28.913633], [-82.402132, 30.672998], [-85.247077, 30.672998], [-85.247077, 28.913633]]]}
spatial-data-service-type
spatial-reference-system
spatial_harvester true